GUIDELINES TO DEVELOP PRODUCT FORMS FROM CHINESE CALLIGRAPHY Except where reference is made to the work of others, the work described in this thesis is my own or was done in collaboration with my advisory committee. This thesis does not include proprietary or classified information. _________________________________________ Yi Sheng Goh Certificate of Approval: _________________________ ________________________ Richard E. Britnell Tin Man Lau, Chair Professor Professor Industrial Design Industrial Design _________________________ ________________________ Clark E. Lundell Stephen L. McFarland Professor Acting Dean Industrial Design Graduate School GUIDELINES TO DEVELOP PRODUCT FORMS FROM CHINESE CALLIGRAPHY Yi Sheng Goh A Thesis Submitted to the Graduate Faculty of Auburn University in Partial Fulfillment of the Requirements for the Degree of Master of Industrial Design Auburn, Alabama December 16, 2005 iii GUIDELINES TO DEVELOP PRODUCT FORMS FROM CHINESE CALLIGRAPHY Yi Sheng Goh Permission is granted to Auburn University to make copies of this thesis at its discretion, upon request of individuals or institutions and at their expense. The author reserves all publication rights. _____________________________ Signature of Author ____________________________ Date of Graduation iv VITA Yi Sheng Goh, daughter of Boon Cheng Goh and Kim Choon Liow was born on September 17, 1981, in Petaling Jaya, Malaysia. She graduated from Pin Hwa High School in Klang in 1999. In 2000, she entered National Cheng Kung University in Tainan, Taiwan and received the degree of Bachelor of Science in Industrial Design in June, 2004. In the same year, she entered the Auburn University Graduate School to obtain the degree of Master of Industrial Design. v THESIS ABSTRACT GUIDELINES TO DEVELOP PRODUCT FORMS FROM CHINESE CALLIGRAPHY Yi Sheng Goh Master of Industrial Design, December 16, 2005 (B.S., National Cheng Kung University, 2004) 115 Typed Pages Directed by Professor Tin Man Lau ?Global Westernization? is the most prominent characteristic of the 20 th century. World culture, design and art form lean towards the West. Western products, like German products can be seen in markets all over the world. But where are the Chinese products? As an Industrial Design thesis, this research was conducted to study the product design from the perspective of Chinese culture. From the heritage of Chinese culture, calligraphy was chosen in this study. The relationship between product form and the aesthetics of Chinese calligraphy was studied. The emphasis of this research was to create a link between contemporary product form design and traditional Chinese calligraphy. Comparisons among the four different styles of Chinese calligraphy and their uniqueness were the goal of this research. Once the guidelines are set, product designers can vi incorporate these elements into their designs. They can not only design a Chinese product, but also a Kai-style product or a Cao-style product. China?s population is about 21.3% of the world?s population; therefore, Chinese-focused products will have a huge potential market. In this thesis, the guidelines were applied to one product that was replicated four times, with each utilizing a distinct calligraphy style to demonstrate how the transformation was carried out. vii ACKNOWLEDGEMENTS The author would like to express her gratitude to her advisor, Tin Man Lau, for his continuing patience and support throughout the course of this research. Also, thanks go to Richard Britnell, and Clark Lundell for their expertise, encouragement and comments. Finally, the author wants to thank her family members Boon Cheng Goh and Kim Choon Liow for their unyielding encouragement and support. Thanks must also be given, along with those mentioned above, to all my friends and peers, of whom there are too many to list, whose friendship, support, and tireless conversation have led me through such an unusual and personally rewarding study. viii Style manual or journal used Publication Manual of the American Psychological Association (Fifth Edition) Computer software used Microsoft Word XP, Adobe Photoshop, and Adobe Illustrator ix TABLE OF CONTENTS 1. INTRODUCTION 1.1. Problem Statement ?????????????????????... 1.2. Need for Study ???????????????????????.. 1.3. Literature Review ??????????????????????. 1.4. Objectives of Study ?????????????????????... 1.5. Definitions of Terms ?????????????????????. 1.6. Assumptions ????????????????????????. 1.7. Scope and Limits ??????????????????????.. 1.8. Procedure and Methodology ??????????????????. 2. ZHUAN SHU or SEAL SCRIPT 2.1. History of Zhuan Shu ????????????????????... 2.2. Characteristic of Zhuan Shu ??????????????????. 2.2.1. Thickness of the stroke ?????????????????.. 2.2.2. Movement of the brush strokes ??????????????. 2.2.3. Curvature of the strokes ?????????????????. 2.2.4. Structure and proportion ????????????????.... 2.3. Relationship between Surfaces in Zhuan Style Products ???????. 2.4. Developing Design Guidelines for Zhuan Style Products???????. 1 2 3 12 13 14 15 16 19 20 20 21 24 25 26 27 x 3. LI SHU or CLERICAL SCRIPT 3.1. History of Li Shu ??????????????????????... 3.2. Characteristic of Li Shu ???????????????????.... 3.2.1. Thickness of the stroke ?????????????????.. 3.2.2. Movement of the brush strokes ??????????????. 3.2.3. Curvature of the strokes ?????????????????. 3.2.4. Structure and proportion ????????????????.... 3.3. Relationship between Surfaces in Li Style Products ????????... 3.4. Developing Design Guidelines for Li Style Products????????.... 4. CAO SHU or CURSIVE SCRIPT 4.1. History of Cao Shu ?????????????????????... 4.2. Characteristic of Cao Shu ???????????????????. 4.2.1. Thickness of the stroke ?????????????????.. 4.2.2. Movement of the brush strokes ??????????????. 4.2.3. Curvature of the strokes ?????????????????. 4.2.4. Structure and proportion ????????????????.... 4.3. Relationship between Surfaces in Cao Style Products ????????. 4.4. Developing Design Guidelines for Cao Style Products???????... 5. KAI SHU or STANDARD SCRIPT 5.1. History of Kai Shu ?????????????????????.... 29 30 30 32 35 37 37 38 40 41 41 42 47 49 52 53 54 xi 5.2. Characteristic of Kai Shu ???????????????????.. 5.2.1. Thickness of the stroke ?????????????????.. 5.2.2. Movement of the brush strokes ??????????????.. 5.2.3. Curvature of the strokes ?????????????????. 5.2.4. Structure and proportion ????????????????.... 5.3. Relationship between Surfaces in Kai Style Products ???????..... 5.4. Developing Design Guidelines for Kai Style Products????????. 6. APPLICATION RESULTS ????????????????????. 6.1. Performance Criteria ?????????????????????. 6.2. Specification ????????????????????????. 6.3. Sketches 6.3.1. Zhuan Style ?????????????????????.... 6.3.2. Li Style ???????????????????????... 6.3.3. Cao Style ??????????????????????... 6.3.4. Kai Style ??????????????????????.... 6.4. Sketch Models 6.4.1. Zhuan Style ?????????????????????... 6.4.2. Li Style ???????????????????????. 6.4.3. Cao Style ??????????????????????... 6.4.4. Kai Style ??????????????????????... 56 56 58 65 66 67 68 70 70 71 72 73 74 75 76 77 78 79 xii 6.5. Control Drawings 6.5.1. Zhuan Style ?????????????????????... 6.5.2. Li Style ???????????????????????.. 6.5.3. Cao Style ??????????????????????... 6.5.4. Kai Style ??????????????????????.... 6.6. Final Models 6.6.1. Zhuan Style ?????????????????????... 6.6.2. Li Style ???????????????????????.. 6.6.3. Cao Style ??????????????????????... 6.6.4. Kai Style ??????????????????????.... 7. DISCUSSION AND CONCLUSIONS ???????????????... REFERENCES ????????????????????????.... APPENDICES ?????????????????????????. A. Samples of Zhuan Shu ????????????????????... B. Samples of Li Shu ??????????????????????.. C. Samples of Cao Shu ?????????????????????... D. Samples of Kai Shu ?????????????????????... 80 81 82 83 84 85 86 87 88 90 93 94 97 100 102 1 1. INTRODUCTION 1.1. Problem Statement ?Global Westernization? is the most prominent characteristic of the 20 th century. World culture, design and art form lean towards the western. (Translated from???? ????????????????????????????????????) (???, n.d.) Wen (as cited in Clunas, 1988) mentioned that most modern Chinese do not know how to appreciate the elegant aesthetic and the practical usage of antique Chinese furniture. They are losing their appreciation of the original Chinese beauty. This could be a crisis of Chinese culture. Each culture should have its own character and thus, the products designed by the particular designer should reflect the elements of one?s own culture. Moreover, products are indispensable in our daily lives; therefore, they should represent their own culture. ?Otto Wagner, an architect and protagonist of Viennese Jugendstil ? a late and predominantly rectilinear manifestation of Art Nouveau ? wrote in 1895, representing this view that all modern forms must correspond to new materials and the new requirements of our time, if they are to fit modern mankind?(Sparke, 1986, p. 42). Although there is information on aspects of Chinese design, traditional Chinese aesthetics are not yet reflected in contemporary products. From the books and articles found, there was no in-depth discussion about the Chinese aesthetic and its relation to product design. 2 1.2. Need for study Products are an essential element in our daily lives, and the way of living is a part of one?s culture. For this reason, it is important for a designer to design a product based on the users? cultural background. The study of culture is very broad, and the first image that the user has of a product is based on its appearance. Therefore, the study of the aesthetic elements of a culture was needed. According to statistical data from the National Bureau of Statistics of China (n.d.), the population of China (excluding Hong Kong, Macau and Taiwan) was approximately 12.8 billion at the end of 2001 and the world?s population was approximately 60 billion. In other words, China?s population was 21.3% of the world?s population. With such a large population, products that meet their needs will have a huge potential market. Therefore, there is a great need to develop products that are Chinese-focused. Each culture should have its own character and thus, a product designed by a particular designer should reflect the elements of his or her own culture. Moreover, since the products are indispensable in our daily lives, those used should be of their own culture. They can also play the role of communicator to the people of different cultures. Products from all over the world are brought to the world?s market where cultural exchange will enable people from different countries to know each other better. From the books and articles found, there was no in-depth discussion about the Chinese aesthetic and its relation to product design. However, there were some that were somewhat related, but they were merely discussions. Therefore, a more in-depth research 3 on the relationship between Chinese culture and contemporary product design was needed. In this research, Chinese calligraphy was chosen as the focus among the other Chinese heritages. This focus created a checklist for industrial designers to design products called the Chinese products, the Kai-style products, or the Li-style products. There are four benefits of this research. The first benefit is to help designers design products based on Chinese aesthetics. Secondly, this research will help product developers gain the Chinese market. Thirdly, it will enhance the aesthetic appreciation of Chinese product. Finally, this research will make Chinese products unique. 1.3. Literature Review Products are an essential element in our daily lives, and the way of living is a reflection of one?s culture. For this reason, it is important for a designer to design a product based on the user?s cultural background. ?Design is, therefore, an important medium of communication which expresses the values of the system within which it functions?(Sparke, 1986, p.205). Culture study is very broad, and the first image that the user has about a product is based on its appearance. ?All kinds and levels of cultural values, whether those manifested in, for example, political ideology, in various social and cultural activities, or in the economic status quo, find their way into the designed artifact by one means or another and those artifacts communicate those values in tangible and visual form?(Sparke, 1986, p.205). Therefore, this research focused on studying the aesthetic elements of a culture. 4 There are books about design and culture. In An Introduction to Design & Culture (1986), Penny Sparke analyzed the design culture in Great Britain, Sweden, USA, Germany, Italy, Finland and Japan. Another book, USDesign 1975-2000 (2001), claimed that the designers readily adapted everyday imagery from American popular culture, from jellybeans to Disney characters to Sears products. These books show that product design based on cultures has been widely discussed; however, none of them talked about Chinese culture in product design. There are some websites about cultural awareness in China and Taiwan. The homepage of?????????????? (n.d.) mentioned about the spirit of the Chinese antique furniture which emphasizes the nature and the environment with the spirit of integration of heaven, earth and human. This webpage does not talk about the contemporary product design from the aspect of the Chinese aesthetic, and also, it does not mention about how to apply the Chinese spirit into the product design. On the other hand, this article reveals that it is possible to convert the abstract Chinese thought into the concrete or specific visual form of an object. The same circumstances occur again in the book written by Craig Clunas entitled Chinese furniture, ?The clue to the work?s true status lies in its title. It is a jing, a ?classic?, on a par with the classic texts underpinning the various ideological systems of Confucianism, Taoism and Buddhism. It is meant to be arcane and hard to interpret; it is meant to be the timeless, secret inner teachings of the carpenter?s art, not a mundane guide to practical action, which was transmitted orally and learned by experience? (Clunas, 1988, p.12). It is shown that from the early age, Chinese had not only their own aesthetic view, but the furniture they made had a strong pragmatic value: 5 Treatise on Superfluous Things, by Wen Zhenheng (1585-1645): When the men of old made tables and couches, although the length and width were not standard, when placed in a studio or room, they were invariably antique, elegant and delightful. Whether sitting, lying or leaning back, there was no way in which they were not convenient. In moments of pleasant relaxation, they would spread out classics and histories on them, examine paintings and calligraphy, display ancient bronzes, dine or take a nap ? all these were possible. The men of today make them in a manner which merely prefers carved and painted decoration to delight the vulgar eye, while the antique pieces are cast aside, causing one to sigh in deep regret (Clunas, 1988, p.11). According to Wen, most modern Chinese do not know how to appreciate the elegant aesthetic and the practical usage of the antique furniture. They are losing this aspect of their culture and the appreciation of the original Chinese beauty. This could be a cultural crisis. Fortunately, today there are designers who are starting to be aware of this problem. The heritage of the 5,000 years of Chinese culture included Chinese calligraphy, Chinese painting, paper sculpture and antique furniture. Chinese calligraphy is not just a form of writing but it is a fascinating art form. With the strength, the speed, the intensity, the transition and the rhythm of the way of manipulating the brush, Chinese calligraphy clarifies lines just like the rhythm in music, and it has become the spirit of different art forms and the performing art (Translated from ???????????????????? ?????????????????????????????????????????) (??? & ???, 1994, p.49). In my proposed research I studied Chinese calligraphy as an example of Chinese culture. 6 Understanding the history of Chinese calligraphy is an essential tool in order to have a better appreciation of the aesthetic it represents. The development of the Chinese calligraphy is shown below: jia gu wen????? da zhuan???? xiao zhuan???? li shu???? zhang cao???? jin cao???? kuang cao???? kai shu???? xing shu???? Figure 1-1 The development of the Chinese words is from pictograph to stylization (Willetts, 1981). Jia gu wen, whose inspiration came from the natural, is the most pictographic. Kai shu, which is simplified and has an abstract form, is the most stylized (see Figure 1-1). 7 Jia gu wen?????, da zhuan????, and xiao zhuan????can be categorized into zhuan shu. Jia gu wen was the engraved pictograph on bones and shell, and its character is thin and rigid, sharp and vigorous, straight and well-balanced (Translated from??????????????) (?? & ??, 2003, p.9). Da zhuan is the general name of zhou wen, gu wen, jin wen and shi gu wen. Jin wen was engraved on bronze ware used in sacrifices and ceremony, so it is dignified, steady and neat (Translated from ????????) (?? & ??, 2003, p.9). Da zhuan is more pictographic than xiao zhuan as it was developed before xiao zhuan. The character of xiao zhuan is slim, dense at the top and sparse at the bottom, like the appearance of the human body. It is a reflection of the beautiful form of the human body (Translated from ?????????? ??????? and ??????????) (?? & ??, 2003, p.9). Moreover, xiao zhuan has the aesthetic of well-proportioned, clean and succinct strokes (Translated from ??? ?????????) (?? & ??, 2003, p.9). During the Qin dynasty, a simplified form of words was created - li shu. The feature of li shu is thin and flat. The revolution of li shu not only reformed the style of words, but also ?emancipated? the characteristic of the brush and the movement of the fingers and the wrist. It elevated the rhythm of visual art, and even endowed the musical sense of time to the two-dimensional strokes (Translated from ????????????????? ???? ???? ??????????????????????????????????? ????????????) (?? & ??, 2003, p.9). Zhang cao????, jin cao????, and kuang cao???? can be categorized into cao shu. Cao shu is a style that intensifies and enriches the expression of strokes in 8 Chinese calligraphy, and that is the key point to appreciate the beauty of cao shu (Translated from??????????????????????????????????) (?? & ??, 2003, p.11). The cultural personalities of xing shu are practical and understandable. It suits both refined and popular tastes, and this is its artistic personality (Translated from?????? ???????????????????) (?? & ??, 2003, p.12). Kai shu is one of the symbols of the Tang culture. Its form is square, conscientious and careful, harmonious and moderate. Kai shu has an important effect on training a writer?s quality of art and expression on the coordination of the eye, the mind and the hand (Translated from???????????and?????????????????? ?????????????????????????????) (?? & ??, 2003, p.13). There is a distinct difference between the kai shu of the north and that of the south. The militarism of the north culture made the style of northern kai shu simple and unadorned, and virile and energetic (Translated from????) (?? & ??, 2003, p.13), whereas the southern kai shu was beautiful and elegant (Translated from????) (?? & ??, 2003, p.13). The above shows the different styles of Chinese calligraphy and their unique features. The main spirit in Chinese calligraphy is nature, as mentioned by?? and ?? (2003) that it is harmonious between human and nature. Every rhythm of life in nature can be reflected in the creation of Chinese calligraphy (Translated from???????????? ?????????????????????) (?? & ??, 2003, p.15). Chiang Yee 9 (1973) also claimed that not only the separate strokes but the structure of the whole character is basically inspired by nature. The appreciation of Chinese calligraphy involves the strokes, the power of writing, and the writer himself. ??and ?? (2003) explained that Chinese calligraphy includes three levels. The first level is the strokes, which are formed from the way of writing. The second level is yi xiang, from the power of the writing, which includes the power of lines, the word structure and the structure of the entire piece. The third level is yi jing, which is the state of mind closely related to the writer?s personality, culture and self-cultivation (Translated from?????????????????????????????????? ??????????????????????????????????????????? ??????) (?? & ??, 2003, p.15). ?Every stroke must be well shaped and beautiful in itself, and form, in combination with other strokes, form a satisfying pattern. But the judgment of a character?s excellence depends largely upon the degree to which it possesses the vitality of a particular natural object? (Yee, 1973, p.113). The way of judging a piece of calligraphy is firstly, by the power of the brush; secondly, by the usage of the ink; thirdly, by the structure or the form of the words; and finally, by qi yun- rhythmic vitality (Translated from?????????????????????????? ???????) (?? & ??, 2003, p.41). Chiang Yee (1973) stated that: The beauty of Chinese calligraphy is essentially the beauty of plastic movement, not of designed and motionless shape. A finished piece of it is not a symmetrical arrangement of conventional shapes, but something like the coordinated movements of a skillfully composed dance ? impulse, momentum, momentary poise, and the 10 interplay of active forces combining to form a balanced whole, Neatness, regularity, and exactitude of outline, such as are found in English or Chinese printing types, are not desirable qualities in Chinese calligraphy (p.117). Chinese prefer asymmetrical balance, for the reason that it seems to possess more movement (p.118). The beauty of Chinese calligraphy is built on its development from the pictograph to the ordered ways of strokes and structural forms, which are their moderate strokes, free structure and perfect overall arrangement (Translated from?????????????? ??????????????????????????????????????????) (??? & ???, 1994, p.47). Chinese calligraphy, which was influenced by Confucianism, developed the beauty of moderation. Moreover, it was also influenced by the Tao whose thought of the Yin Yang was reflected in the calligraphy as Dong Jing (??)-movement and still, and Gang Rou(??)-vigorous and soft (?? & ??, 2003). ?Dignity and animation are two opposite qualities; the existence of one suggests the want of the other. Not until the two are placed in juxtaposition in such a way as to mutually complement one another will beauty and goodness be brought into being in a piece of art.?(Chang, 1975, p. 309) Chinese art has its own spirit. ?The active operative force in a work of art, as well as in the whole universe, is Qi(?)-the all-pervasive ether, the dynamic energy, the ?breath? of life that permeates, animates, and motivates all things? (Fong, 1984, p.4). Within the research, there is much information about the history and the aesthetic of Chinese calligraphy. However, none of them is related to modern day product design. To build a bridge between Chinese calligraphy and contemporary product design, it is important to understand Chinese culture. Therefore, Chinese culture was studied. 11 Bond, Michael Harris (1991) stated that: Contemporary Chinese student in Taiwan tend to value inner development, individualism, a future perspective, and mastery over nature rather than the traditional Chinese values of inner development, collectivism, focus on the past, and submission to nature. There young Chinese prefer a moderate and balanced life combining action, contemplation, and enjoyment. They accept social restraints, are concerned for others, and wish to preserve good traditions. They consider that sensuous enjoyment, sheer meditation, and silent submission to external forces should be avoided. (p.38) The sense of self: 1. Chinese people consistently describe themselves in less positive terms than Americans do (but more positively than the Japanese do). 2. Chinese think of themselves using more group-related concepts (such as, being attentive to others) than Americans do; and they see their ideal ?self? as being closer to their social (or interpersonal) self than Westerners do. In describing themselves, Chinese employ more terms that relate to family roles (grandson, daughter, and elder brother). 3. Chinese describe themselves using the same features of personality that they use to describe other people. These features assess at least whether a person is: socially oriented or self-centered; competent or ineffective; expressive or conservative; self- controlled or impulsive; optimistic or pessimistic. The moderation of the Chinese is shown in the fact that they present themselves as possessing both positive and negative features. This conception of the self probably reflects their society?s need for modesty and balance. (pp.33-34) 12 Although there is information related to the Chinese aesthetic in the field of design, none of it teaches about how to incorporate the essence of Chinese culture into the contemporary product design. In the study, I found that there is no in-depth discussion of the Chinese aesthetic and its relation to the product design. This review proposes an extensive research with an emphasis on the comparisons among the four different styles of Chinese calligraphy and the uniqueness of each style. The result will be a checklist for industrial designers to design products that are so called the Chinese-products, or even the Zhuan-style products, the Li-style products, the Cao-style products, and the Kai-style- products. 1.4. Objectives of Study ? To study the aesthetic elements of Chinese culture through the beauty of Chinese calligraphy. ? To apply the Chinese aesthetics to product design. ? To apply the abstract spirit of Chinese art into product design. ? To develop a checklist for industrial designers to design products that are so called the Chinese products, or even more specifically the Kai-style products, the Li-style products. ? To develop design principles of how to transfer the aesthetic elements of Chinese calligraphy into product design. ? To transform the 2D image of Chinese calligraphy into the 3D form of a product with the illustration of a series of design. 13 1.5. Definition of Terms Qi ?? the all pervasive ether, the dynamic energy, the ?breath? of life that permeates, animates and motivates all things. Calligraphy ? Chinese calligraphy, written by using a Chinese brush made of fur. Bu Bai ??? means ?arrangement of space?. In calligraphy the ?empty? spaces of the imaginary squares are full of invisible muscles joining stroke with stroke. We expect these empty spaces to exhibit some inherent harmony with the strokes. Fen Jian??? means ?relative division?. The Chinese character is always written in an imaginary square which, for the purpose of analysis, is convenient to divide into two or four parts, and more practically divided into nine-fold squares. This has been generally utilized. Qi Yun ??? rhythmic vitality. It is a poetical rather than a philosophical concept, and it has no literal definition. Da Zhuan ? Great Seal Script. It is a synthesis of the variants of Ku-Wen (Ancient Script), whose arrangement and interrelation of the lines of the characters differ in every example, but each has its own value and beauty. Xiao Zhuan ? Small Seal Script or Lesser Seal Script, has a standard character for each object and action; compared to the Great Seal, the forms are simple and not confusing Li Shu ? Clerical Script, invented for official purposes, was much more convenient than Seal writing. It has firm, decorative characters, and the varied shapes of the 14 stroke transform the circular, curved and rounded lines of Small Seal into a square, a polyangular and a straight shape or line. Kai Shu ? Regular Style. It has an inflexible regularity of design. Xing Shu ? Running Script allows for freer handling and more vivid movement. The strokes and patterns of xing shu are designed and executed as carefully as those of kai shu. However, they are written in a quicker manner. Cao Shu ? Cursive Script means ?rough essays? or ?rough draft?, something written quickly and perhaps carelessly. 1.6. Assumptions This study was conducted based on the following assumptions: I. Chinese culture is getting increasing attention from all over the world. II. Product design which possesses the characteristic of Chinese culture will gain more market value. III. Most designers did not apply Chinese aesthetics when they designed their products. IV. When the Chinese calligraphy aesthetics is applied to product design, people?s attention and interest will be aroused. V. Through this research, designers who do not know how to write Chinese calligraphy can also design products which possess the characteristics of the four styles of Chinese calligraphy. 15 VI. People who do not understand Chinese culture are able to differentiate between Chinese-products and non-Chinese products. VII. We can have a product with a strong characteristic of Chinese style by incorporating Chinese calligraphy art into product design. 1.7. Scope and Limits This study was conducted based on the following scope and limits: I. In terms of the time frame, this study focused on Chinese calligraphy ranging from the beginning of the ancient script to the Tang dynasty. II. The approach was on Chinese aesthetics through the four styles of Chinese calligraphy. The application was demonstrated through a series of design of a product. III. Due to time limitation, the research of obtaining a formula on how to transform a two-dimensional Chinese calligraphy into a three-dimensional product design was not in-depth. IV. The focus was on the shape of Chinese calligraphy, which included the thickness, the movement and the arrangement of the strokes. V. In this research, I emphasized the breadth and not the depth of the four different styles of Chinese calligraphy. And in the process, I included as much detail as possible. 16 1.8. Procedures and Methodology This research was exploratory and developmental. The procedure and methodology mentioned below was applied to different styles of Chinese calligraphy, including Kai Shu, Cao Shu, Li Shu, and Zhuan Shu. I. Study the Chinese calligraphy strokes Method: Select the main strokes from each style of Chinese calligraphy and analyze the following: the thickness of the stroke which is caused by the pressure of the writer?s brush on the paper) ?? (????), the movement of the brush strokes from the moment the brush touches the paper until it leaves the paper ?? (????), and the curvature of the sides of each stroke?? (?????????). II. Marshal the criteria of the beauty of Chinese strokes Method: Study the related literature and apply it to the analysis, and then generate new rules that can be used in a 3-D design. III. Study of the proportion of Chinese words Method: Using some words from different styles of Chinese calligraphy, examine the proportion of these words, to see if there is a difference among them. If there is a 17 difference, find out and explain it. If they are the same, then a generalization of the proportion can be drawn. Data needed: Numerical ratio that represents the good proportion in calligraphy. IV. Study of the proportion of the whole piece of writing Method: First, study the arrangement and the composition between the adjacent words and the rows in the calligraphy pieces. Then, study the relationship between each row to form a whole piece. Data needed: Figure indication of the well proportioned calligraphy. V. To develop a checklist for industrial designers to design products called the Chinese- products, or even the Zhuan-style products, the Cao-style products, the Li-style products, and the Kai-style products Method: Draw conclusions from the above study and what I have learned from my research, and then form a checklist for designing products from each calligraphy style. VI. Transform the elements from 2-D into 3-D designs Method: Illustrate by a series of design of a product. Using the characteristics of the four different styles of Chinese calligraphy, design the product that corresponds to each 18 style. There will be a total of four product styles in the series and each of them has the characteristic of its original style. This research will be divided into four sections which are zhuan shu, li shu, cao shu, and kai shu. Each section will examine the history and the characteristic of a particular style. The characteristic of the style includes the analysis of the thickness, the movement, and the curvature of the strokes. It also includes the structure and proportion of the particular style. From the characteristic of each style, the relationship between the surfaces of a product is then generated. Finally, a checklist to design a product from the style will be listed. 19 2. ZHUAN SHU or SEAL SCRIPT 2.1. History of Zhuan Shu Zhuan shu is the oldest style in Chinese Calligraphy. It has a simpler brushwork than the other calligraphy styles; however, the structures of the characters are very decorative. It can be divided into three categories: jia gu wen, da zhuan, xiao zhuan. Jia gu wen or oracle-bone writing, which is the oldest recognizable character, was used three thousand years ago. It was the engraved pictograph on animal bones and tortoise shells dating from the fourteenth to the eleventh centuries B.C. Oracle-bone writing served mostly as the record of divination between a human ruler and the supernatural world (Harrist & Fong, 1999). The characters in jia gu wen were thin and stiff, sharp and vigorous, straight and well-balanced (Translated from??????????????) (? ? & ??, 2003, p.5). Da zhuan or Big Seal style was the general name of zhou wen, gu wen, jin wen and shi gu. It had so many different names or styles because the Chinese character system was not unified at that time and neither was China. People from different places adopted da zhuan and did slight local variations of it. Da zhuan was identified with the bronze inscriptions of the Shang and Chou dynasties (ca.1600-256B.C.) (Harrist & Fong, 1999). The Chinese character system was not unified until the Qin dynasty (221-206 B.C.), when the feudal states of China became united under one 20 Emperor. He then ordered his Prime Minister, Li Si, to unify the scripts of the various states, and as a result, xiao zhuan, the Small Seal was created. It was a simplified and standardized style which was less pictographic and more suitable for universal use. It was characterized by thin wiry lines, regulated spacing, and stylized abstract forms (Harrist & Fong, 1999). 2.2. Characteristic of Zhuan Shu Among the different categories of zhuan shu, xiao zhuan has been chosen to represent the Zhuan style in this research. The character of xiao zhuan is slim, dense at the top and sparse at the bottom, like the appearance of the human body. It is the reflection of the beauty of the human body (Translated from ????????????????? and ??????????) (?? & ??, 2003, p.9). Moreover, xiao zhuan has the aesthetic of well-proportioned, clean and succinct strokes (Translated from ????????????) (?? & ??, 2003, p.9). It has thin wiry lines, regulated spacing, and stylized abstract forms (Harrist & Fong, 1999). 2.2.1. Thickness of the stroke The lines in xiao zhuan are thin, wiry and even in thickness. The pressure of the brush on the paper is very even. The movement of writing xiao zhuan is very similar to drawing lines with even thickness. Furthermore, it has a lot of repetitions and parallel strokes (see Figure 2-1). 21 Figure 2-1 2.2.2. Movement of the brush strokes There are four types of strokes in xiao zhuan, and each of them is written at a constant speed. Also, they have rounded edges at the beginning and at the end of the stroke (???, 1986). The method of writing each stroke is as follows: Figure 2-2 1. Place the brush on the paper and move it slightly to the left. Turn it around to move it to the right. 2. Continue moving to the right with constant pressure on the paper. 3. Turn the brush around to the left and lift it away from the paper. 22 Figure 2-3 1. Place the brush on the paper and move it slightly upward, and then turn it around to move downward. 2. Continue the downward movement with constant pressure on the paper. 3. Turn it around in an upward direction and lift it away from the paper. Figure 2-4 1. Place the brush on the paper and move it slightly upward. Next, turn it around to move downward. 2. Continue the curve movement with constant pressure on the paper. 3. Turn the brush around in an upward direction and lift it away from the paper. 23 Figure 2-5 1. Place the brush on the paper and move it slightly in the opposite direction of the stroke movement. Then turn it around to move towards the direction of the stroke. 2. Continue the movement in the desired direction with constant pressure on the paper. 3. Turn the brush around and lift it away from the paper. Figure 2-6 1. Place the brush on the paper and move it slightly in the opposite direction of the stroke movement. Turn it around to move towards the direction of the stroke. 2. Continue the movement in the desired direction with constant pressure on the paper. 24 3. The numbers indicated in the figure show the sequence of each stroke. The middle stroke or the top stroke is always the first in sequence. However, the left, the right and the bottom strokes are usually the last. 2.2.3. Curvature of the strokes The characters in xiao zhuan are mostly taper bottom or taper top with concave curves or convex curves on both sides. 1. Taper bottom with concave curves: the apex of each curve does not exceed the tangent of the bottom point (see Figure 2-7). 2. Taper top with concave curves: the apex of each curve does not exceed the tangent of the top point (see Figure 2-8). 3. Taper bottom with convex curves: the apex of each curve does not exceed the tangent of the top point (see Figure 2-9). 4. Taper top with convex curves: the apex of each curve does not exceed the tangent of the bottom point (see Figure 2-10). Figure 2-7 Figure 2-8 25 Figure 2-9 Figure 2-10 Most circular shapes look like squares or rectangles with big fillet edges instead of perfect round shapes. Most squares or rectangles have big fillet in each corner, where the two bottom corners have bigger fillets than the two top edges (see Figure 2-11). Figure 2-11 2.2.4. Structure and proportion In general, the characters in xiao zhuan are portrait rectangle. The strokes are evenly spaced. In addition, some characters in xiao zhuan have symmetrical forms while none of the characters in the other styles has them. Xiao zhuan has regulated spacing. However, in most cases, the space in the upper portion of a single character is more likely to be crowded than the space in the bottom portion. This makes the form look slim and tall. 26 Since the center of gravity of each character is located in the middle, the character looks stable and steady. The height to width proportion of most characters in xiao zhuan is approximately 3 to 2 (see Figure 2-12). Furthermore, the proportion between the top and the bottom is narrow width / wide width = 1/2?1/1.125 (see Figure 2-13). Figure 2-12 Figure 2-13 2.3. Relationship between Surfaces in Zhuan Style Product The edges between the adjacent surfaces are fillets, with no sharp edges or corner. The radius of the fillets should be constant in a single edge between two surfaces. 27 2.4. Developing Design Guidelines for Zhuan style products A. Overall principle: I. All edges are fillets. B. Overall shape: II. Height: Width = 3: 2. III. Symmetrical. IV. Taper bottom or taper top with concave curves or convex curves on both sides. ? Taper bottom with concave curves: the apex of each curve does not exceed the tangent of the bottom point; ? Taper top with concave curves: the apex of each curve does not exceed the tangent of the top point; ? Taper bottom with convex curves: the apex of each curve does not exceed the tangent of the top point; ? Taper top with convex curves: the apex of each curve does not exceed the tangent of the bottom point. V. Proportion between top and bottom = Narrow width/wide width = 1/2?1/1.25. C. Details: VI. The proportion between the details is: bottom portion >upper portion. VII. Most circular shapes look like squares or rectangles with big fillet edges instead of perfect round shapes. 28 VIII. All curves and lines are continuous, without sharp angles or corners. IX. The shapes or lines are repeated and each of them is parallel to one another. 29 3. LI SHU or CLERICAL SCRIPT 3.1. History of Li Shu During the Qin and Han dynasties (221B.C.-A.D.220), li shu developed because of growing demands for official records and historical documents. It first evolved in a draft form of seal script, written quickly with a brush and ink on wood and bamboo slips, and later on silk and paper. Refined as an official script, it came to mark orthodoxy for imperially sanctioned texts, which were often engraved on monumental stone stelae. In its developed form, li shu featured modulated brush lines with sweeping horizontal strokes ending in sharp tips, and distinctive down-sweep strokes to the right. The transition to brush and ink opened new modes of artistic expression explored in later periods (Harrist & Fong, 1999). Li shu is a far easier and clearer writing that marked a turning-point in the development of modern characters, now more and more abstract and far from the original pictographs (Lavarini & Franco, 1998). It was developed from the Zhuan, so some of the characters in li shu had the traces of Zhuan. The development of li shu was the most significant revolution in Chinese calligraphy (Translated from????????????? ???????????????????????) (???et al., 2004, p.20). The rounded shapes and curves in zhuan shu were changed into square shapes and straight lines. 30 Pictographic Chinese calligraphy became symbolistic in li shu. However, the Chinese characters did not change much in the latter two thousand years. 3.2. Characteristic of Li Shu The styles in li shu varied from one tablet to another. Among them, Cao Quan Bei was chosen to represent the Li style in this research. The uniqueness of li shu is that most of the characters are in landscape rectangular shapes. They have the gesture of expanding to the left and to the right with a lot of transverse movement. Another obvious characteristic is that there is an accent stroke which is called a ?swallow-tail? (??) stroke, or a sweeping horizontal stroke with a sharp tip in most of the characters. Besides being the main stroke, it is also the longest stroke in each word. 3.2.1. Thickness of the stroke Unlike zhuan shu, the writing of li shu utilizes the movement of the wrist. The thickness in most of the strokes changes from the beginning to the end of the strokes. The most outstanding stroke in li shu is the modulated brush lines with sweeping horizontal strokes ending in sharp tips. The middle of the stroke is thinner than both ends. On the right, there is a knife-shape sharp tip. The thickest point on the left of the sharp tip is either of the same thickness or thicker than the left end of that stroke (see Figure 3-1). 31 Figure 3-1 As mentioned earlier, the characters in li shu have the gesture of expanding to the left and to the right. There are two types of strokes that contribute to this characteristic: the inclining-leftward stroke (see Figure 3-2) and the sweeping-rightward stroke (see Figure 3-3). The inclining-leftward stroke has a rounded shape at both ends with the left end being thicker than the right end. The sweeping-rightward stroke has a thicker end on the right. The falling right stroke has a sharp tip after the thickest point, similar to the right end of the sweeping horizontal stroke. Figure 3-2 Figure 3-3 The left end of almost all the horizontal strokes is thicker than the right end. The strokes become thinner when the brush is moved to the right (see Figure 3-4). In the vertical stroke, the top end is thicker than the bottom end in most characters (see Figure 3-5). Figure 3-4 Figure 3-5 32 3.2.2. Movement of the brush strokes The method of writing each stroke is as follows: Figure 3-6 4. Place the brush on the paper and move it slightly to the lower left. Then turn it around and press it to create the desired thickness of the starting point. 5. Move the brush to the right in a slightly upward direction while lifting it slightly to make the stroke thinner. 6. Then press it on the paper again while continuing the movement to the lower right. 7. After achieving the desired thickness, which can be the same or thicker than the starting point of the stroke, lift the brush gradually to create a sharp tip. Figure 3-7 1. Place the brush on the paper and move it slightly to the lower left. Then turn it around and press it to create the desired thickness of the starting point. 2. Move it to the right in a slightly upward direction while lifting it slightly to make the stroke thinner. 33 3. Turn the brush around to make a rounded shape at the end of the stroke, and then lift it away from the paper. Figure 3-8 1. Place the brush on the paper and move it slightly upward. Then turn it around and press it to create the desired thickness of the starting point. 2. Move it downward with constant pressure on the paper. 3. Pause slightly to make a rounded shape at the end of the stroke, and then lift the brush away from the paper. Figure 3-9 1. Place the brush on the paper and move it slightly upward. Then turn it around and press it to create the desired thickness of the starting point. 2. Move it along the curve with increasing pressure on the paper. 3. Turn it around to make a round or square shape at the end of the stroke, and then lift the brush away from the paper. 34 Figure 3-10 1. Place the brush on the paper and move it slightly to the upper left direction. Then turn it around and press the brush to create the desired thickness of the starting point. 2. Move it along the curve with increasing pressure on the paper. 3. After achieving the desired thickness which has to be thicker than the starting point of the stroke, lift the brush gradually to create a sharp tip. Figure 3-11 1. Place the brush on the paper and move it slightly in the opposite direction to where it will be going. Then turn it around and press it to create the desired thickness of the starting point. 2. Move it to the right in a slightly upward direction while lifting it slightly to make the stroke become thinner. 3. Gradually lift the brush away from the paper to create a sharp tip. 35 Figure 3-12 1. Place the brush on the paper and move it slightly upward. Then turn it around and press it to create the desired thickness of the starting point. 2. Move it downward with constant pressure on the paper 3. Turn it 90 degrees with a smooth transition and lift it slightly to make the stroke thinner. 4. Turn it around and lift it away from the paper. 3.2.3. Curvature of the strokes The horizontal strokes are slightly convex towards the top. The angle of the convexity does not exceed five degrees (see Figure 3-13). The sweeping horizontal strokes with sharp tips are not exactly horizontal; they go down slightly on both sides. The angles of the upper curvature on both ends do not exceed ten degrees (see Figure 3- 14). Figure 3-13 Figure 3-14 36 The bottom curvature of the sweeping horizontal stroke with a sharp tip which can be described as the distance from the apex of the curve to the line drawn from the two bottom point is approximately 1/8?1/11 of the distance between the two bottom points (see Figure 3-15). Figure 3-15 The curvature of the inclining-leftward stroke which can be expressed by the distance from the apex of the curve to the line drawn from the two ends is between the range of 1/2 and 1/12 of the distance between two ends (see Figure 3-16). Figure 3-16 The oblique angle of the sharp tip is between 25?45 degrees (see Figure 3-17). Figure 3-17 37 3.2.4. Structure and proportion The quadrangles in li shu are landscape rectangles. The height to width proportion is around 1.7:3.0, with a tolerance of 0.3 on each side (see Figure 3-18). Most of the rectangles are taper-bottom. The width of the bottom is around 4/5 of the width of the top. In some cases, the top right of the rectangle may have a round or square bulge out corner. All of the four corners have small fillets (see Figure 3-19). Figure 3-18 Figure 3-19 Because the spaces between the strokes are well-balanced, the words appear stable. The characteristic of the structure in li shu is that the strokes in the center or the middle are closer to one another and the strokes in the outer space are more spacious (Translated from????) (??? et al., 2004, p.145). Unlike zhuan shu or kai shu, the characters in li shu are in the form of landscape rectangles. They have the posture of stretching to the left and to the right. 3.4. Relationship between Surfaces in Li Style product The edges between the two adjacent surfaces can be fillet. The cross-section of each face or form can be slightly convex. 38 3.5. Developing Design Guidelines for Li style products A. Overall principle: I. All shapes have the gesture of expanding to the left and right. B. Overall shape: II. Height: Width = 1.7:3.0, with a tolerance of 0.3 on each side. III. Asymmetrical. IV. Emphasis of the sweeping horizontal shape with a sharp tip and / or the sweeping rightward and inclining leftward shapes. V. The sweeping horizontal shape with a sharp tip goes down slightly on the left and right sides. The angles of the upper curvature on both ends do not exceed ten degrees (see Figure 3-14). VI. The bottom curvature of the sweeping horizontal stroke with a sharp tip: the distance from the apex of the curve to the line drawn from the two bottom point is approximately 1/8?1/11 of the distance between two bottom points. VII. The oblique angle of the sharp tip is between 25?45 degrees. VIII. The inclining-leftward shape is round at both ends but the left ends are thicker than the right ends. IX. The sweeping-rightward shape has a thicker end on the right. Moreover, the falling right shape has a sharp tip after the thickest point, which is similar to the sharp tip of the sweeping horizontal stroke. 39 X. The curvature of the inclining-leftward line: the distance from the apex of the curve to the line drawn from the two ends is between the range of 1/2 and 1/12 of the distance between two ends. XI. The horizontal lines are slightly convex towards the top. The angle of the convexity does not exceed five degrees. C. Details: XII. Round shape at the left end of the transverse shape, and top end of the vertical shape. XIII. The left end of the horizontal shape is thicker than the right end. Its thickness gradually becomes thinner when it approaches the right end. XIV. The top end of the vertical shape is thicker than the bottom end. Its thickness gradually becomes thinner when it approaches the bottom end. XV. Circles are oval in shape with the top wider than the bottom, or the left wider than the right. XVI. The shapes in the center or the middle are closer to one another and the shapes in the outer space are more spacious. 40 4. CAO SHU or CURSIVE SCRIPT 4.1. History of Cao Shu Cao shu, which began at the end of the Qin dynasty and formalized in the Han dynasty, was used as a convenient, fast-paced writing style. At that time li shu was still in use. So cao shu was basically the elliptical and auxiliary styles of the li shu. It was used for drafting, or corresponding in emergencies. Since then, cao shu had begun to develop (???, 2002). Since Cao shu was formed from the basis of li shu, they complement each other in development. Cao shu can be divided into three basic styles: zhang cao, jin cao, and kuang cao. The art of cao shu was beginning when zhang cao was formed. It gradually got out of the li style strokes as kai shu came into existence, developed, and well-formed. In jin cao, the strokes between the upper and lower characters always interlinked with each other, and the components on one side of the character was mutually used by the two characters (???, 2002). During the Tang dynasty, famous calligraphers such as Zhang Xu, and Huai Su, wrote jin cao in a more unbridled, audacious and emotional style that was known as kuang cao or wild cursive style. Commonly performed while the writer was inebriated, kuang cao was written in spontaneous, fluid strokes in what might be described as a mad 41 dance of joyous delirium (Harrist & Fong, 1999). The strokes in kuang cao were interlinked, complicated and highly changeable. Some characters were big but others were small. Kuang cao had a strong sense of movement and rhythm. (???, 2002) 4.2. Characteristic of Cao Shu In this research, I have chosen a masterpiece by the well-known calligrapher, Huai Su, to represent the cao shu. It is entitled ?Zi Xu Tie?, which means self narration. Among all the styles of Chinese calligraphy cao shu is the most expressive (?? ?, 2002). It intensifies and enriches the expression of lines in the Chinese characters, and this is the key point for the appreciation of its beauty. (Translated from?????? ????????????????????????????) (?? & ??, 2003, p.11) 4.2.1. Thickness of the stroke From the proportion of the thickness of the strokes and the size of the characters, the strokes in Cao shu are relatively thin. However, within the thin strokes, there are many variations. The line weight always indicates the movement or the speed of the brush. The thinnest lines are the connecting lines which link two strokes to form one continuous stroke. They are written in high speed. The thickness of the line changes while the brush 42 is moving. So, from the thickness of the stroke, we can tell how fast the calligrapher moved the brush. 4.2.2. Movement of the brush strokes Begin writing by placing the brush on the paper and move it against the direction of the movement of the stroke. This means that the tip of the brush is hidden in the stroke which indicates vigor and power. The gesture is powerful and the form looks sparse. The writer?s intention is direct and the characters are written fast. Both the dry strokes and the moist strokes mix very well in the work. The characters are rounded and powerful, bold and unconstrained (Translated from????????????????????????? ?????????) (???, 2002, p.55). None of the two strokes is parallel to each other. Cao shu has a very strong sense of movement and momentum. It is also romantic (???, 2002). It has its own rules of simplified characters or strokes. Different strokes are linked together in a transaction. A writer can link two or more different strokes together or even write the whole piece of calligraphic work in one stroke with many continuous transactions. This is the difference between kai shu and cao shu. On the one hand, all the strokes in kai shu are separated, but on the other hand, cao shu has all or almost all strokes linked together. The transaction from one to another is performed by lifting the brush away from the paper and pressing it on the paper. According to the terminology of 43 Chinese calligraphy, there is Qi, the all pervasive ether, in the transaction or the whole piece of calligraphy. The method of writing each stroke is as follows: Figure 4-1 8. Place the brush on the paper and press it towards the lower right direction. 9. Pause for a little while and then lift it and move it to the right.(Variations can be made by increasing the pressure of the brush on the paper while moving it to the right to make the right end thicker than the left end) 10. Turn the brush around at the end and lift it off the paper. Figure 4-2 1. Place the brush on the paper. 2. Press it towards the lower right direction and move it back to the center of the starting point. 3. Move it downward with the same or more pressure on the paper. 44 4. After getting to the mid-point of the entire stroke, lift the brush off the paper while moving it towards the end of the stroke. Figure 4-3 1. Place the brush on the paper. 2. Press it towards the lower right direction and move it back to the center of the starting point. 3. Move it downward with the same or less pressure on the paper. 4. Turn it around at the end and lift the brush off the paper. Figure 4-4 1. Place the brush on the paper. 2. Press it towards the lower right direction and move it back to the center of the starting point. 3. Move it along the curve while decreasing the pressure on the paper. 4. Lift the brush off the paper while moving it towards the end of the stroke or at the end of this stroke start writing the next stroke. 45 Figure 4-5 1. Place the brush on the paper. 2. Press it towards the lower right direction or the lower left direction depending on the stroke. 3. Turn it around and lift it off the paper while moving towards the next stroke. Figure 4-6 1. Place the brush on the paper. 2. Move it towards the lower right direction while increasing the pressure on the paper. 3. Turn it around at the end of the stroke and lift it off the paper. Alternatively, lift the brush off the paper while moving towards the end of the stroke to create a sharp tip. 46 Figure 4-7 1. Place the brush on the paper. 2. Press it towards the lower right direction and move it back to the center of the starting point .Alternatively, press the brush while moving it along the curve. 3. Move the brush along the curve while decreasing the pressure on the paper. 4. Lift the brush off the paper while moving it towards the end of the stroke or connect it to the next stroke. Figure 4-8 1. Place the brush on the paper. 2. Pause slightly and then move the brush along the curve. 3. Turn it around and pause slightly again. 47 4. Continue moving it along the next curve or lift it off the paper while moving towards the end of the stroke. Figure 4-9 1. Place the brush on the paper and press it towards the lower right direction. 2. Pause for a little while and then lift it and move it to the right. 3. Turn it around and pause slightly. 4. Continue moving the brush along the next curve or lift it off the paper while moving towards the end of the stroke. 4.2.3. Curvature of the strokes Cao shu changed the Chinese characters from square to round shapes (Translated from??????????????) (???, 2002, p.55). Basically the strokes have a variety of curvatures and they are not straight. Even the transverse or the vertical strokes are curved to some extent. They are written in a clockwise direction. However, there are still some strokes that are written in an anti-clockwise direction. In cao shu, there is a variety of methods to start writing a stroke. One method is similar to the starting point in zhuan shu, which is rounded in shape (see Figure 4-10). The next method is similar to the starting point in kai shu, which is at an angle. This will 48 be explained in the next chapter (see Figure 4-11). The last method is a sharp tip that shows the movement of the brush tip (see Figure 4-12). Figure 4-10 Figure 4-11 Figure 4-12 49 4.2.4. Structure and proportion The basic method of performing the triangular plane composition is to make one of the adjacent characters bigger and the other one smaller. In ?Zi Xu Tie?, the writer split apart the components and broke down the structure of a character to form a series of triangular planes composition (see Figure 4-13). ??? (2002) mentioned that the writer of ?Zi Xu Tie? had successfully manipulated the composition of the triangular planes. Figure 4-13 50 As cao shu was developed from zhuan shu, it has rounded portrait shapes in most of its characters. The density of a character is spread out to the surrounding space; therefore cao shu?s characters are spacious. This makes them look thin but powerful, spacious and bright (see Figure 4-14). Figure 4-14 51 The structures of cao shu and kai shu are very different. The space between the strokes and the characters are dramatically different. While some spaces can be very crowded with thick strokes or high density strokes, others can be spacious with strokes that are far apart from each other. This creates a lively sense of movement, speed, and emotion (see Figure 4-15). The red circles in Figure 4-15 indicate the space between the strokes. Figure 4-15 Another interesting fact about cao shu is that the center of gravity of the characters is not necessarily at the center. It can be at the bottom left, top right, or top left. 52 The imbalance of each character livens up the work and forms a piece of well-balanced Chinese calligraphy art. In order to appreciate a piece of cao shu, one has to look at the whole piece and not at a specific character. Not a single character can be separated or drawn from the other characters in the work because they are linked together to form a complete work of art. The characters are not aligned in a horizontal direction. In jin cao and zhang cao, the characters are aligned in a vertical direction, but in kuang cao, they do not line up in either direction. Therefore, the characters of the chosen piece in this research, ?Zi Xu Tie?, which is a piece of kuang cao, are not aligned in either direction. They correspond with the adjacent characters and the size of each character is varied and scattered. This characteristic combines all the characters in the calligraphy into one complete piece of work (???, 2002). 4.4. Relationship between Surfaces in Cao Style Product The relationship between the surfaces in the Cao style is much freer than the relationship in the other styles. The joint of any two surfaces can be a fillet with multiple radii. The radius can be increasing or decreasing gradually, or even superseding mutually. Also, the cross-sections of each form or surface can be curved. 53 4.5. Developing Design Guidelines for Cao style products A. Overall principles: I. All the lines are curved. II. Curves are smooth and continuous. III. Sense of movement in each shape or line. B. Overall shape: IV. Proportion: more on vertical than horizontal. V. Smooth curve outline. VI. Asymmetrical. C. Details: VII. Triangular arrangement between details. VIII. At least one end of the curved shapes has a sharp tip. IX. Thickness of every curve or shape is not constant. X. None of the two lines is parallel to each other. XI. No perfect circle. XII. The thickness of the product is not constant. XIII. The joint of two surfaces can be a fillet with multiple radii. The radius can be increasing or decreasing gradually, or even superseding mutually. XIV. The cross-sections of each form or surface can be curved. XV. Each shape or form does not have to be aligned. 54 5. KAI SHU or STANDARD SCRIPT 5.1. History of Kai Shu The standard script which was developed in the Han period began as a refinement of li shu. It did not have the modulated sweeping strokes or the uniform wirelike corners of zhuan shu. The inner brushwork and architectonic structure of the characters were developed in order to produce legible characters that replaced li shu as the formal script used for official writing and monumental stelae (Harrist & Fong, 1999). The development of kai shu can be divided into several phases. It was created during the Han dynasty (Lavarini & Franco, 1998), and was formulated in the Three Countries period. The representative work for this period is ?Xuan Shi Biao?, written by the famous calligrapher, Zhong You. The characteristic of kai shu became fully developed during the South North Dynasty. The representative calligraphy then was Wang Xizhi. There is a distinct difference between the kai shu of the north and that of the south. Wei Bei kai shu is the North Dynasty calligraphy. The militarism of the northern culture made not only the style of northern kai shu simple and unadorned, but also virile and energetic (Translated from????) (?? & ??, 2003, p.13). The beauty of Wei Bei is 55 bold, resolute, and majestic, while the atmosphere is solemn and respectful (Wang, 2003). However, the calligraphy from the south is beautiful and elegant?Translated from??? ?) (?? & ??, 2003, p.13). The development of kai shu reached its peak in the Tang dynasty which was rich in Chinese calligraphy (?? & ??, 2003). According to an edict of the Tang dynasty, calligraphy was a part of the selection of talent and the evaluation of a person. The entire society valued calligraphy seriously. So there were many great calligraphers and calligraphy theorists at that time (Wang, 2003). From Wei Jin to the South North dynasty, the popular scripts were kai shu, xing shu and cao shu. Specialists of all scripts appeared in the Tang dynasty. In the early Tang dynasty, Tang Tai Zong, the second emperor, loved Wang Xizhi's calligraphy. Due to the emperor?s influence, many calligraphers at that time studied his calligraphy. However, in the middle Tang dynasty, a great calligrapher, Yan Zhenqing, changed the style of the calligraphy from the early Tang dynasty. His calligraphy works were solemn, dignified, and tremendous. After him, another famous calligrapher, Liu Gongquan, created another style, which was thin but full of energy. Yan?s style is sinew and Liu?s style is bone (Wang, 2003). The theories of calligraphy boomed in the Tang dynasty. Tang Tai Zong pointed out that the spirit was the soul of calligraphy and the mind was the muscle. Ouyang Xun explained the eight methods of the character Yong (Yong Zi Ba Fa). His ?thirty-six 56 methods? was the representative work of the structural theory of kai shu that significantly influenced the theoretical research thereafter (?? & ??, 2003). 5.2 Characteristic of Kai Shu Known as the standard style of writing, the characteristic of kai shu, which is the most common in today?s printing, is upright and square. In this research, I used the tablet called ?Jiu Cheng Gong Bei?(????) written by the master calligrapher, Ou Yang Xun, from the Tang dynasty to represent kai shu. The form of kai shu is square, conscientious and careful, harmonious and moderate. It has an important effect on training a writer about the quality of art and the expression from the coordination of the eye, the mind and the hand (Translated from?? ??????????????????????????????????????????? ??) (?? & ??, 2003, p.13). The strokes in kai shu are complicated and the lines are full of variations. 5.2.1. Thickness of the stroke There is much variation in the thickness of the strokes. The transverse strokes are thinner than the vertical strokes (see Figure 5-1). The descending left strokes have thick and angular starting points at the top right and sharp tips at the bottom left (see Figure 5- 2). The descending right strokes have thin starting points that are at the top left. They are the thickest at about 4/5 of the length of the stroke measured from the left. They have 57 sharp tips at the right (see Figure 5-3). Most of the strokes, especially vertical strokes and descending left strokes, have a thick angular starting point (see Figure 5-4). Figure 5-1 Figure 5-2 Figure 5-3 Figure 5-4 Most of the strokes have an angle between 30 degrees and 45 degrees at the starting point which is at the top or on the left (see Figure 5-5). Figure 5-5 The top right corner has a thick 30 degrees to 45 degrees diagonal corner (see Figure 5-6). Figure 5-6 58 5.2.2. Movement of the brush strokes The movement of the brush in kai shu is slow and careful; sometimes pausing to get the desired thickness or angle. The transverse strokes are not perfectly horizontal. The left ends are always lower than the right ends and they are oblique at an angle of not more than 20 degrees from the horizontal base (see Figure 5-7). Figure 5-7 The method of writing each stroke is as follows: Figure 5-8 Figure 5-9 1. Place the brush on the paper at position1. 2. Press it while moving it to position 2 to create the desired thickness. 3. While maintaining the same pressure on the paper, move the brush to position 3. 4. Lift the brush off the paper gradually while moving it to position 4. Figure 5-9 shows the variations of the stroke. 59 Figure 5-10 1. Place the brush on the paper at position 1. 2. Press it on position 2 to create the desired thickness of the starting point. 3. Slightly lift it while moving it to position 3 to create a thinner shape in the middle. 4. Press the brush on the paper gradually while moving it from position 3 to position 4. 5. Slightly lift it at position 4 and press it at position 5. 6. Lift the brush off the paper while moving it to position 6. Figure 5-11 1. Place the brush on the paper at position 1. 2. Press it on position 2 to create the desired thickness of the starting point. 3. Move it to position 3 in order to write a straight stroke in the middle of the starting point. 4. Gradually lift it while moving it to position 4. 5. Lift the brush off the paper while moving it to position 5. 60 Figure 5-12 1. Place the brush on the paper and move it slightly upward. 2. Press it on position 2 to create the desired thickness of the starting point. 3. While maintaining the same pressure on the paper, move the brush to position 3. 4. Move it to position 4 in order to write a straight stroke in the middle of the starting point. 5. Maintain the same pressure on the paper while moving it to position 5. 6. Slightly press the brush on position 6 to create the desired thickness of the ending point. 7. While maintaining the same pressure on the paper, move the brush to position 7. 8. Lift it off the paper while moving it to position 8. Figure 5-13 1. Place the brush on the paper and move it slightly upward. 2. Press it on position 2 to create the desired thickness of the starting point. 3. While maintaining the same pressure on the paper, move it to position 3. 61 4. Move it to position 4 in order to write a straight stroke in the middle of the starting point. 5. Slightly lift the brush to create a thinner shape and, while moving it to position 5, press it to the paper to increase the thickness of the stroke again. 6. Gradually lift it off the paper while moving it to position 6. Figure 5-14 1. Place the brush on the paper and move it slightly in the opposite direction from the flow of the stroke. 2. Turn it around and press it on the paper while moving it from position 3 to position 4. 3. After achieving the desired thickness, which is thicker than the starting point of the stroke, lift the brush gradually to create a sharp tip. Figure 5-15 1. Place the brush on the paper and move it slightly upward. 2. Press it on position 2 to create the desired thickness of the starting point. 62 3. While maintaining the same pressure on the paper, move it to position 3. 4. Move it to position 4 in order to execute a straight stroke in the middle of the starting point. 5. Maintain the same pressure on the paper while moving it to position 5. 6. Slightly decrease the pressure on the paper while moving the brush to position 6. 7. Turn it around and move it to position 7. 8. Press the brush on the paper on position 7 and lift it off the paper while moving it to position 8. Figure 5-16 1. Place the brush on the paper. 2. Press it on position 2 to create the desired thickness of the starting point. 3. Move it to position 3 in order to execute a straight stroke in the middle of the starting point. 4. Gradually lift the brush while moving it to position 4 and finally lift it off the paper to create a sharp tip. 63 Figure 5-17 1. Start with the transverse stroke (see Figure 5-17). 2. Press the brush on position 3 to create the desired thickness of the upper right corner. 3. Move it to position 4 in order to execute a straight stroke in the middle of the starting point. 4. Maintain the same pressure on the paper while moving it to position 5. 5. Slightly press the brush on position 6 to create the desired thickness of the ending point. 6. While maintaining the same pressure on the paper, move it to position 7. 7. Lift it off the paper while moving it to position 8. Figure 5-18 1. Press the brush on position 1 to create the desired thickness of the upper right corner. 2. Move it to position 2 while decreasing the pressure on the paper. 3. Slightly lift it while moving to position 3 to create a thinner shape in the middle. 64 4. Press it on the paper gradually while moving it from position 3 to position 4. 5. Pause at position 5 and turn the brush around to position 6. 6. Press it on the paper on position 6 and lift it off the paper while moving it to position 7. Figure 5-19 1. Place the brush on the paper. 2. Press it while moving it from position 1 to position 2. 3. Continue increasing the pressure and pause at position 3. 4. Turn the brush around at position 4 and gradually lift it while moving it to position 5 and finally lift it off the paper to create a sharp tip. Figure 5-20 1. Place the brush on the paper. 2. Press it on position 2 to create the desired thickness of the starting point. 3. Move it to position 3 in order to execute the straight stroke in the middle of the starting point. 65 4. Gradually lift it while moving it to position 4 and finally lift it off the paper to create a sharp tip. 5.2.3. Curvature of the strokes The shape of the beginning of the strokes is at a diagonal angle. The shape at the end of the strokes is either sharp or at a diagonal angle (see Figure 5-21). Figure 5-21 Most of the strokes in kai shu are straight or slightly curved. The descending left strokes have a very small curvature. The depth of an apex which is the distance measured from the apex to the straight line connecting two ends, does not exceed 1/7 of the length of the stroke (see Figure 5-22). Figure 5-22 66 5.2.4. Structure and proportion The structures of kai shu are distinguished by the arrangement of their individual strokes (Translated from ????????) (???, 2002, p.56). Individual structure: the center of gravity has to be steady. The major stroke plays an important role in the character (see Figure 5-23). Figure 5-23 Up and down structure: this structure is composed of the upper and lower part or the upper, middle and lower part. The center of gravity of all parts has to be on the same vertical line (see Figure 5-24). Figure 5-24 Left and right structure: this structure is composed of left and right part or left, middle and right part. It has two different cases: firstly, the left is longer and less dense than the right; secondly, the right is longer and sparser than the left (see Figure 5-25). 67 Figure 5-25 Surrounded structure: this structure can be divided into whole surrounded or half surrounded types. In this structure, it is important to keep the outside surrounded strokes and the inside strokes in proportion (see Figure 5-26). Figure 5-26 In general, the height to width proportion of kai shu is approximately 2:1.6?2:1.7 (see Figure 5-27). Figure 5-27 5.3. Relationship between Surfaces in Kai Style Product According to the angular and sharp characteristics in kai shu, the relationship between the surfaces is chamfer instead of fillet. A chamfer has an angular form. 68 Furthermore, x and y setbacks of the chamfer can be the same or different according to the need of the product form. 5.4. Developing Design Guidelines for Kai style products A. Overall principles: I. The form is very angular. II. The form has a stable appearance. III. All edges are chamfers. B. Overall shape: IV. Height: width ratio is approximately 2:1.6?2:1.7. V. Upright and square. VI. Transverse lines are not perfectly horizontal. The left ends are always lower than the right ends and the transverse lines are oblique, at an angle not more than 20 degrees from the horizontal base. VII. Lines are either straight or with small curvature. VIII. The top right edges have a thick 30 degrees to 45 degrees diagonal corner IX. Asymmetrical C. Details: X. All shapes have sharp tips on one side XI. Transverse lines are thinner than vertical lines 69 XII. Descending left shapes have thick and angular starting points and sharp tip at the bottom left ends. XIII. Descending right shapes have thin starting points at the top left ends and the thickest width around 4/5 of the shape length measured from the left. The tip at the right is sharp. XIV. Most of the shapes have an angle between 30 degrees and 45 degrees at the starting points which is the top or the left of the strokes XV. Most of the shapes are thick and angular at the end(s) or corner(s) XVI. There are no round circles XVII. The transverse lines are not perfectly horizontal. The left ends are always lower than the right ends and the transverse lines are oblique, at an angle not more than 20 degrees from the horizontal base. XVIII. Lines are either straight or slightly curved. The depth of an apex, which is the distance from the apex to the straight line connecting two ends, does not exceed 1/7 of the length of the stroke. 70 6. APPLICATION RESULTS In this chapter, the guidelines developed in the previous chapters will be applied to the design of a smell recorder to help illustrate the uniqueness and characteristics of each calligraphy style, and to demonstrate how the transformation is carried out. The purpose of this product is to help people remember the smell that they would like to keep in memory, and to share the smell between two products via a network. This product records, emits and transfers smells, sounds and images. 6.1. Performance criteria Major Functions ? Record and emit smells and transfer data through the network Integrated Functions ? Record sounds, record images, portable Uses ? Travel and daily life Scenarios ? Beach, botanical garden, Valentine? Target Market ? Age 20?35 71 6.2. Specification 1. This product has to be portable, so that users can bring it anywhere to record smells, and to smell the scents that were previously recorded. 2. This product has to have the following features in order to provide all the above functions: I. Smell sensor II. Smell emitter III. Camera lens IV. LCD screen V. Speaker VI. Earphone jack VII. Microphone VIII. Seven buttons: On/Off, Record, Play/Pause/Stop/Enter, Next/Fast forward, Previous/Rewind, Volume/Intensity up and Volume/Intensity down. IX. Smell cartridges compartment X. Memory card compartment XI. Rechargeable battery XII. Power plug-in ( recharge battery ) To provide the product functions and the above features, a reasonable size for this product is around the palm size. 72 6.3. Sketches 6.3.1. Zhuan style Figure 6-1. Zhuan style -- form developing sketches 73 6.3.2. Li style Figure 6-2. Li style -- form developing sketches 74 6.3.3. Cao style Figure 6-3. Cao style -- form developing sketches 75 6.3.4. Kai style Figure 6-4. Kai style -- form developing sketches 76 6.4. Sketch models 6.4.1. Zhuan style Figure 6-5. Zhuan style -- form study model made of foam (front) Figure 6-6. Zhuan style -- form study model made of foam (back) 77 6.4.2. Li style Figure 6-7. Li style -- form study model made of foam (front) Figure 6-8. Li style -- form study model made of foam (back) 78 6.4.3. Cao style Figure 6-9. Cao style -- form study model made of foam (front) Figure 6-10. Cao style -- form study model made of foam (back) 79 6.4.4. Kai style Figure 6-11. Kai style -- form study model made of foam (front) Figure 6-12. Kai style -- form study model made of foam (front) 80 6.5. Control drawings 6.5.1. Zhuan style Figure 6-13 81 6.5.2. Li style Figure 6-14 82 6.5.3. Cao style Figure 6-15 83 6.5.4. Kai style Figure 6-16 84 6.6 Final models 6.6.1. Zhuan style Figure 6-17 Figure 6-18 IX. Parallel, repeated shapes I. Fillet edges VII. Rectangle with big fillet edges VIII. No sharp corners II. Height: width= 3:2 IV. Taper bottom with concave curves V. Narrow width(bot.) / wide width (top) = 1/2?1/1.25 III. Symmetrical VI. Bottom portion > upper portion 85 6.6.2. Li style Figure 6-19 Figure 6-20 I. Gesture of expanding to the left and right II. Height: Width = 1.7:3.0 III. Asymmetrical IV. Emphasis of the sweeping rightward and inclining leftward shapes XI. Horizontal lines are slightly convex towards the top XII. Round shape at the left end of the transverse shape XIII. The left end of the horizontal shape is thicker VI. Depth of apex is 1/8- 1/11 of the distance between two bottom points VII. 25-45 degrees oblique angle VIII. Inclining leftward shape: left end is thicker IX. Sweeping-rightward shape: right end thicker, sharp tip after the thickest point XV. Oval shape with the top wider than the bottom 86 6.6.3. Cao style Figure 6-21 Figure 6-22 I. All lines are curved II. Curves are smooth and continuous III. Sense of movement IV. Proportion: vertical>horizontal V. Smooth curve outline VI. Asymmetrical VIII. At least one end has sharp tip IX. Thickness is not constant X. No parallel lines XV. Each shape is not aligned XII. Thickness of the product is not constant XIII. Edges with multiple radii 87 6.6.4. Kai style Figure 6-23 Figure 6-24 I. Angular form III. All edges are chamfers VIII. 30-45 degrees diagonal corner II. Stable appearance IV. Height: Width= 2:1.6-2:1.7 V. Upright and square IX. Asymmetrical XVII. Transverse lines are oblique in an angle XVIII. Lines are either straight or slightly curved. VII. Lines are either straight or with small curvature. X. Sharp tip on one side XI. Transverse lines are thinner than vertical lines XIV.30-45 degrees angle at starting point XV. Thick and angular at the corner 88 7. DISCUSSION AND CONCLUSIONS The intention of this thesis was to seek a probable approach to transform the aesthetic elements from Chinese calligraphy into product forms design. In this research, four styles of Chinese calligraphy (zhuan shu, li shu, cao shu, and kai shu) are used to help design products that have Chinese inspired characteristics. Four design guidelines are developed based on the four styles. Four product forms are then designed to demonstrate the application of these guidelines. The design guidelines are developed by evaluating each style. Designers may use only a partial checklist to design a product form according to their needs. However, the more conformity to the guidelines, the more character of the particular style the product would have. Designers may also use a combination of guidelines from different styles and apply it to a product form design. Since there are four guidelines and 10 to 16 items in each guideline, many different combinations are possible. Although the application results have been tested on some individuals in an informal test, it would be valuable to use a large focus group to match the design of other product forms to the calligraphy styles. This may help further validate the relationship between each style and each form. 89 Suggestion for future research: Based on these studies, the idea of how the human brain conceives three- dimensional forms from visual recognition and the brain?s cognitive process should be further researched with the possibility of creating a guideline for designers. Calligraphy or other two-dimensional art form can be used as an example to show what the brain?s recognition process is and how the brain transform the two dimensional image into three- dimensional form. This could lead to a systematic method for transforming a two- dimensional image to a three-dimensional form. Such a method would be greatly helpful to designers. 90 REFERENCES Books: Bond, Michael Harris (1991). Beyond the Chinese face: insights from psychology. Hong Kong: Oxford University Press. Chang, Chi-Yun (1957). Essence of Chinese culture. Taiwan: The China News Press. Yee, Chiang (1973). Chinese Calligraphy. Massachusetts: Harvard University Press. (First Published by Methuen & Company, Ltd., 1938) Clunas, Craig (1988). Chinese furniture; photography by Ian Thomas. London: Bamboo Publishing, Ltd. Crow, Carl (1938). Chinese are like that; drawings by Sapajou. London: Harper& Brothers. Denver Art Museum (2001). USDesign 1975-2000. Munich: Prestel Verlag. Fong, Wen C. (1984). Images of the mind: selections from the Edward L. Elliott Family and John B. Elliott collections of Chinese calligraphy and painting at the Art Museum. New Jersey: Princeton University. Harrist, Robert E., Jr. and Fong, Wen C. (1999). The embodied image: Chinese calligraphy from the John B. Elliott Collection. New Jersey: Princeton University. Sparke, Penny (1986). An introduction to design and culture in the twentieth century. London: Allen & Unwin. 91 Willetts, William (1981). Chinese Calligraphy: It?s History and Aesthetic Motivation. Hong Kong: Oxford University Press. ?? and ?? (2003). ??????. ?????????????. ??? and ???(Eds.)(1994). ???????????. ???????. ??? (1986). ????. ?????????. ???, ???, ??, ???, ???, ???, and ??? (2004). ??????? ?. ????????????. ???(2003).???????????. ??????. ???(2001). ??????. ??????????. ??????(?). (1979). ??????????. ????(2002). ??????. ????????????. ???(2002). ????. ????????????. ???(2002). ?????????. ??????????. ???(2002). ?????????. ??????????. ???(2002). ????. ????????. ???(1999). ??????????????BP(Boundless Play). ??????? ???. Websites: ???(n.d.). ???????????????????. Retrieved October 6, 2004, from http://residence.educities.edu.tw/lingyf/na/col027.html 92 ??????????????. (n.d.). Retrieved October 6, 2004, from www.shine-d?cor.com National Bureau of Statistics of China. (n.d.) Retrieved October 10, 2004, from http://www.stats.gov.cn Lavarini, Diana, and Franco, Anna Del (1998). A brief history of Chinese characters. Retrieved September 20, 2005, from http://www.sinophilia.org/scrittura/scritturastoria.htm Wang, Lixin (2003). South North dynasty and Sui dynasty Chinese calligraphy history. Retrieved September 20, 2005, from http://www.wavedancing.net/history/southnorth.htm 93 APPENDICES 94 Figure 7-1. Sample of Zhuan Shu 95 Figure 7-2. Sample of Zhuan Shu 96 Figure 7-3. Sample of Zhuan Shu 97 Figure 7-4. Sample of Li Shu 98 Figure 7-5. Sample of Li Shu 99 Figure 7-6. Sample of Li Shu 100 Figure 7-7. Sample of Cao Shu 101 Figure 7-8. Sample of Cao Shu 102 Figure 7-9. Sample of Kai Shu 103 Figure 7-10. Sample of Kai Shu