Investigation of Al2O3 Nanoparticle Laden Lubricants and Refrigerant Mixtures During Two-Phase Flow Boiling
Date
2018-04-27Type of Degree
PhD DissertationDepartment
Mechanical Engineering
Metadata
Show full item recordAbstract
In space conditioning and in cooling systems for high power density electronics, vapor compression cycles provide cooling. The working fluid is a refrigerant and oil mixture. A small amount of oil is needed to lubricate and to seal the sliding parts inside the compressors but, when mixed with refrigerant and carried through the system and in heat exchangers, the lubricant in excess penalizes the heat transfer coefficient and increases the flow losses: both effects are highly undesired yet unavoidable. Nanolubricants - a lubricant with dispersed nano-size particles - can be a cost-effective technology to address this problem and for improving the efficiency and performances of vapor compression cycles. Several researchers postulated that the magnitude of the heat transfer enhancement due to the presence of nanoparticles is much higher than the gain in the liquid thermal conductivity and that the nano-scale interactions between the nanoparticles and the refrigerant/oil liquid layers are responsible for the heat transfer intensification. This research aims at understanding the mechanisms responsible for heat transfer intensification during two-phase flow processes when nano-thermal vectors are used. This was achieved by providing a consistent set of experimental data that document the effects of the nanoparticles on the two-phase flow heat transfer coefficient and pressure drop, and by developing a theoretical model that captures the effects of the nanoparticles. The effects of Al2O3 nanoparticles on the thermophysical properties of a polyolester lubricant (POE) were measured at different nanoparticles mass concentrations (0%, 10%, and 20%) and with different surfactants, used as dispersants. Tests on evaporative two-phase flow of mixtures of refrigerant R410A and Al2O3 nanolubricant were reported for different nanoparticles mass concentrations (0%, 0.05%, 1%, and 3%), and it was observed that the two-phase flow heat transfer coefficient was either enhanced or degraded depending on oil and nanoparticle concentrations, and on the mass flux. Interestingly, pressure drop did not seem to be affected by the presence of nanoparticles. A simulation tool based on correlations and theoretical models was developed to describe the nanoparticle distribution and behavior within the liquid film. The model provided a platform for future investigations into the behavior of high viscosity nanoparticle suspensions.