Browsing by Title
Now showing items 1734-1753 of 9119
Design of 3.33GHz CML Processor Datapath
(2012-04-17)
Almost a decade processor speed has been stuck at operating frequency 2-3GHz due to excessive power consumption of CMOS logic gate at higher frequency whereas predicted speed at present was 10-15GHz. This leads the idea ...
Design of a Geotextile Roadbed Antenna to Create a Wireless Highway Network
(2007-12-15)
Incorporation of antennas into geotextile fabric to create a roadbed reinforcement with electronic transmission capabilities may find use in expanding communications infrastructures. The design of a model transmission ...
Design of a Guidance Controller Using Network Topology
(2016-08-05)
In dynamic environments, the control of a formation of unmanned vehicles remains a significant control problem on both network and guidance dynamics levels. Currently, formations of unmanned vehicles require multiple ground ...
Design of a Hybrid Memory System for General-Purpose Graphics Processing Units
(2012-04-27)
Addressing a limited power budget is a prerequisite for maintaining the growth of computer system performance into and beyond the exascale. Two technologies with the potential to help solve this problem include general-purpose ...
Design of an Outdoor Wireless Local Area Network and Antenna Analysis
(2006-08-15)
One of the ongoing projects of the Engineering Network Services (ENS) at Auburn University (AU) is to design and implement an outdoor Wireless Local Area Network (WLAN). This project involved using Access Points (AP) that ...
Design of Calorimeter and Heat Measurement of Lithium-ion Battery
(2017-04-20)
Since the temperature of the lithium-ion battery has a great impact on its performance and life, heat generation measurement of the lithium-ion battery becomes one of the most important parts of designing lithium-ion battery ...
Design of Copper-Based Adsorbents for Gas Separation and Purification: Exploring Novel Materials and Optimization Strategies
(2023-08-14)
This dissertation provides a comprehensive overview of the design, synthesis, and performance optimization of copper-based adsorbents for gas separation and purification. Adsorption, a cost-effective separation technique ...
Design of Customized Independent Living Environment for Individuals with Mobility Issues
(2024-05-03)
Since ancient times, the groups of people with disabilities cannot be ignored, and wars around the world resulting in many amputations in army veterans and civilians have brought disability issues to the world consciousness. ...
Design of Direct Digital Frequency Synthesizer for Wireless Applications
(2005-08-15)
Direct Digital Synthesis can be practically defined as a means of generating highly accurate and harmonically pure digital representations of signals. High speed DDS presents an attractive alternative to use of Phase locked ...
Design of High Performance Radio-Frequency Phase-Locked Loops
(2018-07-26)
Phase-locked loop, or PLL, is widely used in different areas of electronic system such as wireless transceivers which use PLL to generate carrier signals. Nowadays, the requirement for ever increasing data rate puts more ...
Design of Lateral Support for Non-Integral Wing Walls of Culverts
(2017-11-20)
Traditionally, culverts are built with integral wing walls. This style of culvert has shown consistent issues at the joint where the wing wall frames into the culvert bodies due to differential settlement and inadequate ...
Design of Low-Voltage Broadband Folded Blixer for SDR Application
(2013-11-11)
Recent years, a large number of researches have been made on the software-defined radio (SDR) architectures. SDR is radio communication systems where typical functions have been implemented in hardware (e.g. mixers, filters, ...
Design of MEMS-Based Tunable Antennas, Organic Transistors and MEMS-Based Organic Control Circuits
(2008-05-15)
The advent of precision three-dimensional micromachining technologies in the last couple of decades has seen the birth of an exciting and potentially revolutionary field called Microelectromechanical Systems (MEMS). ...
Design of Protective Covers Against Natural Hazards
(2011-05-06)
The purpose of this project is to design a protective cover against natural hazards for aircraft, vehicles, and ground structures. Protection against natural hazards is necessary for maintaining the integrity of a vehicle ...
Design of Reconfigurable Baseband Filter
(2010-11-19)
With the rapid development of worldwide wireless communication networks, mobile terminal devices compatible for multi-standard and various applications are needed. Software defined radio is a suitable answer to those demand. ...
Design of Resilient Heterogeneous Wireless Networks
(2013-07-19)
With the growing use of new telecommunications technologies such as 4G and wireless hotspots, heterogeneous wireless networks (HetNets) are gaining more attention. The source of heterogeneity of a HetNet can either be the ...
Design of Sustainable Materials by the Transformation of Biorefinery Derived Waste Biomass into Biobased Polymeric Resins: Synthesis, Characterization, Applications
(2022-11-29)
Polymeric resins (PRs) are one of the most versatile materials, with a wide range of application fields. However, the synthesis of these polymeric resins predominantly relies on the precursor derived from the petroleum ...
Design of Wide Band Transformer-Based Oscillator and Capacitive Coupled Multi-Phase VCO
(2013-11-11)
Since globe wireless demand is increasing rapidly, more delicate and functional radio frequency (RF) devices are required. Software defined radio (SDR) has been introduced to address the challenges in this complicated ...
Design Open Systems: How Can Middle Branch Harbor in Baltimore be Designed as an Open System?
(2013-03-22)
This thesis researches the potential of an open systems approach to the design of urban coastlines. Open systems are created and informed by the matter- energy that continually flows through them. A crucial feature is their ...
Design Optimization and Health Monitoring for Multi-Directional Composite Flywheel Energy Storage Systems
(2006-08-15)
Flywheels are used to store kinetic energy through the rotation of an inertial mass, which usually rotates at very high speeds. Generally, that energy can be extracted (using a motor-generator system) in the form of ...